Self Priming Pump Single Spring Mechanical Seal 25mm Burgmann BT AR
301
Burgmann Type BT AR 301-6-70mm Self-Priming Pump Booster Pump
Mechanical Seal
Single-Spring Mechanical Seal 301 Replace Aesseal B01 Burgmann
Bt-Ar
1. Operations Conditions:
| Structure: Single End |
| Pressure: Low Pressure Mechanical Seals |
| Speed: General Speed Mechanical Seal |
| Temperature: General Temperature Mechanical Seal |
| Performance: Wear |
| Standard: DIN24250 |
| Model NO.: Type 301, BT-AR |
| Balance: Unbalanced |
| Specification: Inner Diameter: 6 mm to 70 mm |
| Temperature:-30ºC to +200ºC |
| Pressure:≤0.6MPa |
| Speed:≤10m/s |
2. Materials:
| Structural Features: single end, unbalanced, independent direction
of rotation, rubber bellow transmission. This component has a
compact structure and it is easy to install. The bellow and the
spring provide pressure compensation to the seal faces. The rubber
bellow design prevents possible radial run-out so the floatabilitiy
of the rotary ring is increased. |
| Stationary Ring:Ceramic(Alumina),Silicon Carbide Reaction Bonded |
| Rotary Ring:Q5,Resin Impregnated Carbon Graphite(Furan),Silicon
Carbide Reaction Bonded |
| Secondary Seal:Fluorocarbon Rubber(),Nitrile(NBR),Ethylene
Propylene(EPDM) |
| Spring and Metal Parts:Stainless Steel |
| Seat Types: |
| Applications:Clean Water |
3. Performance Capabilities:
Temperature | -30℃ to 200℃, dependent on the elastomer |
Pressure | Up to 6 bar |
Speed | Up to 10 m/s |
End play/axial float allowance | ±0.1mm |
Size | 6mm to 70mm |
Brand | JR |
Face | Carbon, SiC, TC |
Seat | Ceramic, SiC, TC |
Elastomer | NBR, EPDM, etc. |
Spring | SS304, SS316 |
Metal parts | SS304, SS316 |
Packing Detail | 1.From 8mm to 30mm is packed in plastic sheets grouply and M box.
2.From 32mm to 70mm is wrapped in plastic paper individually then
grouply in M box.
3.Individual packing ,1 pc in 1 small box is available as well with
cost of packing added. |
301mechanical Seals Factory Direct Sale Pump Seal 301
SeriesMechanical Seals Water Seal
Enclosed rubber bellows mechanical seal 301 (BT-AR)
Equivalent to:
Burgmann BT-AR mechanical seal
John Crane (Cyclam) PR/DR mechanical seal
Flowserve 118 mechanical seal
Latty T750 mechanical seal
Roten 37B/ L5 mechanical seal
Sterling BT mechanical seal
Comonly used as the external seal in water cooled APV pumps
Model | d1 mm | d3 | d6 | d7 | l1 | l3 |
BGM 301-6 | 6 | 18 | 8 | 22 | 14 | 4 |
BGM 301-8S | 8 | 18 | 10 | 22 | 15 | 4 |
BGM 301-8M | 8 | 20 | 10 | 22/26 | 15/165 | 4/5.5 |
BGM 301-8L | 8 | 24 | 10 | 26 | 16.5 | 55 |
BGM 301-10 | 10 | 24 | 12 | 26 | 21 | 8 |
BGM 301-11 | 11 | 24 | 13 | 26 | 21 | 8 |
BGM 301-12 | 12 | 24 | 14 | 25/26 | 21 | 8 |
EGM 301-13 | 13 | 24 | 15 | 26 | 18/21 | 5.5/8 |
BGM 301-13L | 13 | 28 | 16 | 28 | 21 | 8 |
BGM 301-13H | 13 | 32 | 16 | 29.5 | 30.5 | 8 |
BGM 301-14 | 14 | 28 | 16 | 28128.5 | 210 | 8 |
BGM 301-14L | 14 | 32 | 16 | 29.5 | 21 | 8 |
BCM 301-15S | 15 | 28 | 16 | 28.5/30 | 21 | 8 |
BGM 301-15M | 15 | 32 | 16 | 30/295 | 21 | 8 |
BGM 301-15L | 15 | 39 | 18 | 38 | 21 | 8 |
BGM 301-16S | 16 | 28 | 16 | 29.5/30 | 21 | 8 |
BGM 301-1M | 16 | 32 | 18 | 29.5 | 21 | 8 |
BGM 301-16L | 16 | 39 | 18 | 38 | 21 | 8 |
BGM 301-16H | 16 | 32 | 16 | 30 | 29 | 10 |
BGM301-17 | 17 | 39 | 19 | 42 | 21 | 8 |
BGM 301-18 | 18 | 39 | 20 | 42 | 21 | 8 |
Model | d1 mm | d3 | d6 | d7 | l1 | l3 |
BGM301-19 | 19 | 39 | 21 | 42 | 21 | 8 |
BGM 301-20 | 20 | 39 | 22 | 42 | 21 | 8 |
BGM301-20L | 20 | 42 | 24 | 45 | 23 | 10 |
BGM301-22s | 22 | 36 | 24 | 45 | 26.5 | 10 |
BGM 301-22L | 22 | 42 | 24 | 45 | 23 | 10 |
BGM301-23 | 23 | 47 | 25 | 50 | 23.5 | 10 |
BGM 301-24 | 24 | 47 | 26 | 50 | 23.5 | 10 |
BGM 301-25 | 25 | 42 | 27 | 50 | 23.5 | 10 |
BGM 301-25L | 25 | 47 | 27 | 50 | 235 | 10 |
BGM 301-23 | 26 | 47 | 29 | 50 | 23.5 | 10 |
BGM 301-27 | 27 | 47 | 30 | 50 | 23.5 | 10 |
0GM 301-28 | 28 | 54 | 31 | 57 | 25 | 10 |
BGM 301-30 | 30 | 54 | 33 | 57 | 25 | 10 |
BGM 301-32 | 32 | 54 | 35 | 57 | 25 | 10 |
BGM 301-35 | 35 | 60 | 38 | 63 | 26 | 10 |
BGM 301-38 | 38 | 65 | 41 | 68 | 30 | 12 |
BGM301-40 | 40 | 65 | 43 | 68 | 30 | 12 |
BGM 301-45 | 45 | 70 | 48 | 73 | 32 | 12 |
BGM 301-50 | 50 | 85 | 52 | 88 | 38 | 15 |
BGM 301-55 | 55 | 85 | 58 | 88 | 38 | 15 |
BGM 301-60 | 600 | 105 | 63 | 110 | 45 | 15 |
BGM 301-65 | 65 | 105 | | 110 | 47 | 15 |
0GM301-70 | 70 | 105 | | 110 | 47 | 15 |
We are a manufacturer. All seals have bulk inventory and can be
shipped to you quickly. We promise to ship you in small quantities
within 3 days.Advanced technology, excellence, replace original
1. Different models of mechanicals seals for a wide variety of
Grundfos® pumps, among them: CR(N), NB, NK, CLM, LP, TP, etc.
Available in diverse combinations of materials and different
diameters: 12, 16, 22, 28, 33, etc. Also mechanical seals for
Sarlin®. Division of waster pumps. Available in various materials:
silicon-graphite carbide, silicon carbide-silicon carbide; combined
with EPDM and FKM elastomers.
2. Mechanical seals are available for different references
Gorman-Rupp® pumps. Special models for the transfer of clean water,
sewage, oil industry, agriculture and others.
GRN-38'1
3. Mechanical seals for Fristam® pumps. Wide range of models and
materials in the most standard diameters: 22,30 and 35 mm.
Different assembly possibilities for the most well-known pump
models: FP, FL and FT.
4. Broad range of mechanical seals compatible with Flygt® and
Grindex® waste water pumps. These mechanical seals are
characterized by their easy and fast installation, without having
to make any modification to the pump. Manufactured in stainless
steel and in solid tungsten carbide. Special tools are not
necessary for their installation.
5. Mechanical seals for EMU® pumps. They get two static faces and
one rotating face. We can supply the complete seal or spare faces.
6. Different designs of mechanical seals for Ebara® pumps, single
and double seals in combinations carbide-silicon carbide and
graphite-aluminium oxide.
8. Mechanical seals for all types of Calpeda® pumps: centrifugal
pumps, multistage, submersible. Different models of mechanical
seals in a wide range of materials.
7. Mechanical seals compatible for APV® pumps, among them: Puma,
ZMA, ZMB, ZMD, ZMS, ZMH, ZMK. Rosista® and Pasilac®, W and W+. Some
designs with wave spring like the special seals for APV Howard®
pumps and Crepaco Clean Line®. All of them have been manufactured
in materials suitable for working with fluids such as juices, milk
and drinks in general.
8. Allweiler, Simple design of mechanical seals simple but with
special measures for this type of pump.
9. Different models of mechanical seals compatible for Alfa-Laval®
pumps series CM, FM, MR, LKH,GM and ALC. Also the models for the
range of lobular SSP and SR pumps. Mechanical seals in different
combination of materials tungsten carbide, silicon carbide,
graphite; combined with different types of elastomers: NBR, EPDM
and FKM.
10. Mechanical seals for ABS® submergible pumps specific wastewater
treatment. Different models of mechanical seal available: oil
chamber mechanical seal and water mechanical seal.
Fixing and Applying Directions of Mechanical Seals
| 1. Select Appropriate mechanical seal to match the materials
according to work conditions and host machine equipment. |
| 2. The radial acting deviation for the shaft(shaft sleeve) of the
installed mechanical seal shall be 0.04mm by maximum while the
axial movement value of the rotor shall be no more than 0.1mm. |
| 3. The seal cover (or shaft cover) of the stationary ring of the
installed mechanical seals,the vertical degree of the seal face
should be 0.04mm by maximum. |
4. When installing the mechanical seals,the shaft(shaft
sleeve),seal chamber,seal face as well as the mechanical seal face
should be 0.04mm by maximum. |
| 5. When conveying medium of over high or low temperature,with
medium which are easy catch fire,easy for explosion.Related
mechanical seal standards must be referred to take appropriate
measures such as quench,rinsing,coolong and filtrating. |
| 6. Appropricate lubrication must be choosen when mechanical seal is
installed.The installment size of the mechanical seal must be
guaranteed to the installment instruction. |
| 7. Before the machine starts running,the hermetic compartment shall
be full of medium and well lubricated.Dry friction which may lead
to the damage of the air-tightness is strict forbidden. |
How does your factory do regarding quality control?
Answer: Quality is priority. We always attach great importance to
quality controlling from the very beginning to the very end.
